トップ
STS1000 Series Static Transfer Switch(110Vac/220Vac) Öth
1. Specification
1.Switch over between two power suppliers
2.Automatic Selection of batter supply
3.Switch over time less than 4s
4.Any two AC power supplies with sinusoidal output, high adaptability
5.Provide RS485 communication and Dry contact, support SNMP remote
モデル
Single cut type UP-STS16S UP-STS25S UP-STS32S UP-STS40S UP-STS45S
Double cut type UP-STS16D UP-STS25D UP-STS32D UP-STS40D UP-STS45D
Phase Single Phase
output current 16あ 25あ 32あ 40あ 45あ
Max allow current 18あ 28あ 35あ 45あ 50あ
AC Input
AC Input voltage 110Vac/220Vac
Input voltage range 90~130Vac@110Vac; 190~260Vac@220Vac
Valid working Voltage ±12%, backlash±5V
頻度 50Hz/60Hz(set in factory)
Power off voltage 110V: ≤55Vac Or ≥135Vac,backlash±5V≤55Vac Or ≥135Vac,backlash±5V 220V: ≤190Vac Or ≥260Vac,backlash±5V≤190Vac Or ≥260Vac,backlash±5V
Power off frequency ≤45Hz or ≥65Hz,Power off Voltage=±0.2Hz
Switch Time <4ms
Overload capacity Load current is 110%, operating continuously
Load current> 110%, immediately shut-off;
Working Environment
Dielectric strength 2000Vac/10mA/60s
Humiditty 0%~90%, no moisture condensation
Work temperature -25℃~50℃
保管温度 -40℃~70℃
ノイズ(1m) <55dB
Size(mm) 482*44.5*343(1U)
Communitcation RS485/SNMP

返信を残す

あなたのメールアドレスは公開されません. 必須フィールドにマークが付いています *

エンジェルとチャット
すでに 1902 メッセージ

  • 天使 10:12 午前, 今日
    メッセージを受け取ってうれしく思います, これがあなたへの天使の返事です